Installation the Pulley of the Shower Sliding Door
Users who install shower rooms think they are no strangers to pulleys. If users want to install it at home, how should we do it?
1. Installation classification of shower room pulley
1.1 Shower room big flat wheel single wheel, sliding door big hanging wheel, shower room pulley, shower room wheel.
1.2 Alloy wheels, shower trailer wheels, shower room pulley, shower room accessories, rollers.
1.3 Spring swing single wheel, shower wheel, shower pulley.
1.4 Plastic eccentric pulley, sliding door wheel, curved glass shower wheel, sliding door small hanging wheel.
2. Pulley installation method
2.1 Place the stone foundation in the installation position, place the lower guide rail in the middle of the stone foundation, and then install the left and right fixed glass. Then install side members on both sides. When installing the leftovers, the aluminum plugs should be clamped in the upper and lower parts, and then the upper and lower guide rails and leftovers should be locked with 4 * 35 screws.
2.2 The left and right edge materials are sandwiched with aluminum on the wall. The shower room frame assembly is based on the stone foundation placed in the middle. After adjusting the position, mark the drilling position of the pneumatic drill on the wall. The expansion glue is used for drilling on the wall. Move and assemble the shower frame to the stone base, lock the screws, and install the decorative screw cover.
2.3 Install the movable glass hanger and the upper pulley on the upper guide rail.
2.4 Install the sliding wheel on the sliding door glass. First, the pulley is installed on the sliding door glass. Since the pulley can be adjusted, after installing the pulley, press the adjustment button to clip the pulley into the lower rail, install the magnetic strip and water bar, and install the handle on the movable door glass.
The above steps are for pulley installation. Users can try to install it by themselves, which will fill you with a sense of achievement!
