Why are sliding shower glass door difficult to open and close properly?

Why are sliding shower glass door difficult to open and close properly?




The wet bathroom environment makes it difficult to keep the sliding shower glass door in good condition. Dirt, moisture and normal wear may damage the door and its track, making it difficult to open or close the door. Read the following article to understand why the sliding shower glass door is difficult to open and close properly?
 

1. Curved tracks


The curved track will hinder the smooth sliding of the sliding shower glass door, or even cannot slide at all. If the metal rail at the top or bottom of the sliding shower glass door is bent or broken, it may be difficult to open or close the door. The inwardly curved track will clamp the roller, making the door unable to move. The outward curved track may cause the door to derail. Although slight bending can usually be fixed with pliers, more serious damage should be solved by professionals.
 

2. Dirty rollers


The roller is a part at the bottom of the glass sliding door, which can slide normally along the track. If you find it difficult to open and close the glass door, dirt and debris from the outside may start to accumulate in the glass door roller, causing your glass door to be stuck. You can use a vacuum cleaner and slit tools to remove major debris, or you can use a wet rag or paper towel to clean the area more thoroughly.
 

3. Misaligned wheels


If the roller of the sliding glass door is misaligned, the whole door will jump out of the track. To fix this problem, you need to adjust the bottom screw that secures the wheel. Turn the screw clockwise to raise the door, and counterclockwise to lower the door. To maintain balance, make sure that both sides of the door are adjusted.
 

4. Damaged or rusted rollers


The damp air is bad for the roller of the sliding shower glass door, but it is very difficult to repair these parts. This requires the removal of fixed doors and sliding glass doors. When the sliding glass door is removed, unscrew the roller and replace it. Once the new drum is installed, reinstall the door and adjust the wheels to the correct height. Finally, reinstall the fixed door and fix it properly.
 

5. Broken or damaged glass panels


Broken glass doors panels are a safety issue. Due to the environment or accidental use, the sliding glass door may be damaged, cracked or broken, or even become foggy. You should deal with minor cracks in a timely manner, as this may lead to the need to completely replace the entire glass.
 

Conclusion


Common problems with sliding shower glass doors that are difficult to open include: curved tracks, dirty rollers, misaligned wheels, broken or corroded rollers, and broken or damaged glass panels. When there is a problem with the sliding glass shower door, please contact your local glass shower door contractor. Please visit the website to learn more about shower hardware.
 

Get In Tohch


Recommend Read