Is there a Quick Way for Maintaining a Shower?

Is there a quick step for users to reinstall the shower after initial installation or cleaning? Home decoration experts tell you that you can quickly install a shower in just seven steps, which is both practical and simple. Let's take a look!

Step 1. Turn off the water source, wrap the raw material tape around the outlet to prevent leakage, and install the main body of the hot and cold faucet.

Step 2. Connect the water distributor to the straight sprinkler pipe, adjust the height, and install the sprinkler bracket on the vertical pipe.

Step 3. Determine the installation height, mark the installation position of the fixed spray board connecting bracket with a marker, and use an electric drill to drill holes on the wall.

Step 4. Install the riser fixing connection bracket, tighten the screws, and loosen the gloves on the riser to secure the connection bracket.

Step 5. Connect the water separator to the main body of the hot and cold faucet.

Step 6. Connect the shower hose to the water dispenser and install a handheld shower.

Step 7. Adjust the position, check if the cold and hot water interfaces are installed correctly, and if the drainage is normal.

Final suggestion:

After the ordinary installation steps of the shower nozzle have been completed, the handle should be wiped dry after normal use to avoid rusting. You can refer to the specific steps above and then refer to the instructions. I believe it can be easily installed successfully!